Cold Water Unit The water-cooled screw refrigerator is used in the cold water unit of the plant. The unit mainly consists of the compressor, the condenser, the vaporizer, the cold water system, the microprocessor control system and the accessories. The unit is compact in its structure, convenient in its installation, and efficient in its operation. […]
Month: May 2019
CO2 Pressure Pump-700LCO2 Extraction Equiptment
CO2 Pressure Pump The CO2 pressure pump in the plant is the power source to increases the CO2 pressure. It mainly increases the Co2 pressure to supercritical pressure with an inlet pressure of 4 Mpa and an operating pressure of 35 Mpa and the ype is 3RCd125-6.5/40. It mainly consists of a power end, a fluid […]
Off-gas Tank-700L Supercritical CO2 Extraction Plant
Off-gas Tank(C303) The off-gas tank recovers the used CO2.The extractor works intermittently. When each period of extraction ends, the material inside the extractor should be replaced. To cut the cost, the CO2 in the extractor should be recovered and stored. When a certain quantity of CO2 is recovered, the compressor compresses it to use it […]
Extraction Heater and Separation Heater-700L Supercritical Fluid Extraction Part
Extraction Heater & Separation Heater(E402A～E404) The extraction heater and the separation heater convert the state of CO2.The shell-and-tube heater exchanger is used in both heaters. The hot water provides energy to control the temperature safely and smoothly. Its structure is similar to that of Condenser (see Fig 3.6), and the Parameters are shown in table […]
Condenser- 700L Supercritical Fluid Extraction SFE Systems
Condenser (E401) The condenser is a heat exchanger which converts the gas CO2 into the liquid CO2. It mainly consists of the tube pass, the chamber plate, the end cover, the shell pass, and so on, with parameters and structure as shown in table 3.5 and figure 3.6. The tube pass and the chambers are the […]
CO2 Low-temperature Storage Tank-700L Supercritical Fluid Extraction Part
CO2 Low-temperature Storage Tank(C301) The CO2 low-temperature storage tank provides CO2 gas source for the whole plant, with a volume of 15m3. The industrial CO2 is transported to the low-temperature storage tank and fills the CO2 into it through the through liquid inlet. The storage tank is a double cylinder structure, the inner cylinder is […]
CO2 Storage Tank-700L CO2 Extraction Equipment Part
CO2 Storage Tank (C302) The CO2 storage tank is a storage tank for liquid CO2 in the device, and the liquid level in the tank is displayed on site by a magnetic column-type liquid level meter. The upper part of the tank consists of safety valve, pressure meter, pressure transmitter, liquid inlet and emptying port. […]
Separator-700L CO2 Supercritical Extraction Machine
Separator (S201～S202) The separator is the core equipment for the extraction. According to the ASME Ⅷ-1, the vertical jacketed multi-layer high pressure vessel, the material of the vessel is 304 where contact with water, total 2 sets. The main parameters and the outline structure is shown in Table 3.2 and Figure 3.3 respectively, the detailed […]
Extractor – 700L*3 CO2 Supercritical Extractor Equipment
Extractor (R101～R103) The extractor is the core equipment for the extraction. According to the ASME Ⅷ-1+colde case 2695, the vertical jacketed multi-layer high pressure vessel, the material of the vessel is 316L where contact with raw material, the material of the vessel is 304 where contact with water. The main parameters and the outline structure […]
Main Extraction Equipment of 700L*3 SCFE
Main Extraction Equipment of 700L*3 SCFE: a)Extractor,3 sets， R101/R102/R103； b)Separator,2 sets，S201/S202； c)CO2 storage tank,1 set，C302； d)Condenser，1 set，E401； e)Heat Exchanger，3 sets，E402～E405； f)Off-gas tank，1 set，C303； g)Filter，2 sets，S201B/S202B(one for work one for spare)； h)CO2 compressor，2 sets，P502/1/P502/2(one for work one for spare)； i)CO2 pump，1 set，P501； j)CO2 recovery compressor，1 set, P503； k)Cooling water unit，1 set，E406； l)Cooling water tower，1 set，E407； m)Hot […]